So for this project We had to choose a short song and light it using a visualizer. I chose to do my project in the grandMA on PC software. Probably one of the biggest struggles I had was getting the visualizer to talk with the programming software. It took about an hour of troubleshooting and a phone a friend to get the two of them working. I ended up having to change the software’s IP address as well as the visualizers and then a fair amount of fussing about in the network configuration to get it to work. Once I did have it working though I was able to have some fun. I took my 39″ TV and set it up on my table and then with an HDMI out on my laptop I was able to get the visualizer up on the TV and had a grand old time programming. All in all I would say I enjoyed this project. Despite the few issues I had networking the visualizer and my own learning curve with the software, getting to see your show as you program, especially on a large TV is really fun. Below are some of the pictures from my programming session.
Stage Lighting Projects 